Pump control modules

The modules in this section offer solutions specifically for the requirements of variable displacement pumps. Possibilities for closed loop displacement control, open loop displacement control with additional pressure control (p / Q) or the combination of closed loop displacement control and pressure control are available. The power control resp. load limit control are available as an option.


PQP-171-PPQP-171-P

Universal pump control module

Typical applications:

  • swivel angle control
read more

This module is used as a universal closed loop control module, e.g. for swivel angle control. It has an integrated power amplifier for proportional valves. Several parameters offer optimal adaption to the respective valve. The controller runs with a loop time of 1 ms and the amplifier with 0,125 ms for the current control.

The command value and the feedback value are read in by scalable analog signals (range 0… 10 V or 4… 20 mA). Ramp function and PID controller can be used universally. The output current is closed loop controlled and therefore independent of the supply voltage and a varying solenoid resistance. The output stage is monitored for cable breakage and switches off in case of detected errors.

Programmable are the standard PID control parameters and a threshold value for the integrator limitation and activation as well as various parameters for the valve adaptation. The operation is simple and problem-oriented, whereby a very short training period can be ensured.

PQP-171-P


PQP-176-P

Universal pump control module for swivel angel, pressure and power control

Typical applications:

  • new pump control module
  • usable with EATON, HAWE Inline, Bosch Rexroth and other pumps
  • swivel angle, pressure and power control
  • mooring mode
  • integrated power stage or with analog output for valves with OBE
read more

This device is used for servo pumps to control displacement, pressure and power/torque.
Via a directional valves, with one or two solenoids with integrated power stage or with integrated electronics (OBE), the swivel angle adjustment is controlled.
The control structure is designed as a cascade and so suitable for many different pumps of different manufacturers. A negative swivel angel for active pressure reducing (mooring mode) can be parameterized.
The command values and the feedback values are read in via scalable analogue signals in the range of 0… 10 V or 4… 20 mA.
The output current is closed loop controlled and therefore independent from the supply voltage and a varying solenoid resistance. The output stages are short-circuit proof and are monitored for cable break down to the solenoids.

PQP-176-P


PQP-176-P-PFN

Universal pump control module for swivel angel, pressure and power control

Typical applications:

  • new pump control module
  • with ProfiNet interface (EtherCAT and other are in preparation)
  • usable with EATON, HAWE Inline, Bosch Rexroth and other pumps
  • swivel angle, pressure and power control
  • mooring mode
  • integrated power stage or with analog output for valves with OBE
read more

This device is used for servo pumps to control displacement, pressure and power/torque.
Via a directional valves, with one or two solenoids with integrated power stage or with integrated electronics (OBE), the swivel angle adjustment is controlled.
The control structure is designed as a cascade and so suitable for many different pumps of different manufacturers. A negative swivel angel for active pressure reducing (mooring mode) can be parameterized.
The the feedback values are read in via scalable analogue signals in the range of 0… 10 V or 4… 20 mA. The command signales are set by the fieldbus communication.
The output current is closed loop controlled and therefore independent from the supply voltage and a varying solenoid resistance. The output stages are short-circuit proof and are monitored for cable break down to the solenoids.

PQP-176-P-PFN

GSDML File