#Profibus_DP

Vendor_Name         = "Bihl+Wiedemann"
Model_Name          = "B+W Coup CAN"
Revision            = "1.0"
Ident_Number        = 0x1741
Protocol_Ident      = 0 ; PROFIBUS-DP
Station_Type        = 0 ; DP-Slave
FMS_supp            = 0
Hardware_Release    = "V: A"
Software_Release    = "V: A"

9.6_supp            = 1
19.2_supp           = 1
93.75_supp          = 1
187.5_supp          = 1
500_supp            = 1
1.5M_supp           = 1
3M_supp             = 1
6M_supp             = 1
12M_supp            = 1

MaxTsdr_9.6         = 60
MaxTsdr_19.2        = 60
MaxTsdr_93.75       = 60
MaxTsdr_187.5       = 60
MaxTsdr_500         = 100
MaxTsdr_1.5M        = 150
MaxTsdr_3M          = 250
MaxTsdr_6M          = 450
MaxTsdr_12M         = 800

Redundancy          = 0
Repeater_Ctrl_Sig   = 0
24V_Pins            = 2 ; 0/1/2: nc/in/out

Freeze_Mode_supp    = 1
Sync_Mode_supp      = 1
Auto_Baud_supp      = 1
Set_Slave_Add_supp  = 0
Min_Slave_Intervall = 1 ; in units of 100us
Modular_Station     = 1
Max_Module          = 20

Max_Input_Len       = 24
Max_Output_Len      = 24
Max_Data_Len        = 48
User_Prm_Data_Len   = 0

Module    = "I/O (8 bytes)" 0xB7
EndModule

Module    = "I/O (8 bytes) nicht Konsistent" 0x37
EndModule

Module    = "I/O (16 bytes)" 0xBF
EndModule

Module    = "I/O (16 bytes) nicht Konsistent" 0x3F
EndModule

Module    = "I/O (24 bytes)" 0xBF, 0xB7
EndModule

Module    = "I/O (24 bytes) nicht Konsistent" 0x3F, 0x37
EndModule